How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Railsback Your Own Question
Jeremy Railsback
Jeremy Railsback,
Category: Industrial Equipment
Satisfied Customers: 9020
Experience:  Field Service Tech at AirWorx
8380480
Type Your Industrial Equipment Question Here...
Jeremy Railsback is online now
A new question is answered every 9 seconds

My genie tz-50 won't operate at all, stuck with riggers down,

Customer Question

My genie tz-50 won't operate at all, stuck with riggers down, all rigger lights are on and lift in level, if I hold the leveling button, it just sits there in beeps, all other commands do not work but relays are clicking
Submitted: 2 years ago.
Category: Industrial Equipment
Expert:  Jeremy Railsback replied 2 years ago.
Hi,Here's a couple sections out of the manual for you to check if you haven't.
Expert:  Jeremy Railsback replied 2 years ago.
Here's the section on testing the key switch.
Expert:  Jeremy Railsback replied 2 years ago.
If neither of those help then you probably just need to calibrate the level sensors.I'll post that procedure here.
Expert:  Jeremy Railsback replied 2 years ago.
And more. along with outrigger level sensor procedure.
Expert:  Jeremy Railsback replied 2 years ago.
Here's the last bit on outrigger level sensors.