How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 675
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a brush bandit 200xp with a ford 300 6

Customer Question

I have a brush bandit 200xp chipper with a blown ford 300 6 industrial engine. is it possible to put a truck motor in the chipper. I have been looking for two weeks and can't find a rebuilt or used one anywhere
Submitted: 2 years ago.
Category: Industrial Equipment
Expert:  Rudolph Diesel replied 2 years ago.
HelloWelcome to JA!The Ford 300 industrial engine, also known as the CSG649i engine, is a rugged workhorse. To survive in the industrial work place these engines have upgraded components including hardened cast iron timing gears, two groove harmonic balancers, a heavy duty water pump with a .75" diameter shaft to accommodate a larger bearing, severe duty hypertechnical pistons, full sump 6 quart oil pan The truck or car 300 will fit in place but will not last as long due to the passenger car components.Here is a link for parts on the industrial 300 Let me know if i can help moreRD

Related Industrial Equipment Questions