How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 692
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Wiring diagram 0640tGoal, manual operation

Customer Question

Wiring diagram for Onan 0640t
Goal, manual operation for irrigation system
Submitted: 2 years ago.
Category: Industrial Equipment
Expert:  Hank_F replied 2 years ago.
My name is ***** ***** I am going to assist you with this.

0640t Goal is not an Onan model number. I have no idea what it is.
Can you please be a little more specific as to what it is that you are wanting?
Customer: replied 2 years ago.

Onan engine model 0649t

Onan Gen Set model 60.ODVB-15R/2868

1st. Want to wire for manual start and run

2nd shutoff standby controller circuit so there is no power drain when generator is not in use

3th. tie into auto stop on irrigation system so generator engine shuts down when center pivot shuts down, Valley system have two terminals dedicated to remote shut down of a diesel generator just need to know

what terminals on generator control circuit to connect to.



Expert:  Hank_F replied 2 years ago.
Sorry, that is an industrial rated genset that I am not qualified to work on.
I will have to move this question to the appropriate category.