Hyundai Repair Questions? Ask a Mechanic for Answers ASAP
You need to remove the Door Panel & Test the "2" wires at the Door Lock ActuatorClick Attachments BelowYELLOW & WHITE wires will show a "Reversal Rest At Ground" circuitLOCKOne wire will Have Voltage +One wire will have Ground -UNLOCKThe wire that had Voltage + is now Ground -The wire that had Ground - is now Voltage +IF testing shows Voltage + & Ground - on "both wires"Then the Actuator is bad
let me know if you need further
I posted ALLClick Attachments that were posted
Sorry......That is step by step out of the Factory Service ManualThere is no other specific diagramsLet me know if you need further
Thanks for the update
Let me know if you need further
Did you have any other questions?I see you have viewed my reply but have not selected a rating.Rating does not incur any additional costs, it simply allows me to be compensated for my time here.It also does not close the question, you can follow up at any time.Thank you.