How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., Hyundai Technician
Category: Hyundai
Satisfied Customers: 2102
Experience:  Hyundai Gold certified, ASE Master tech 15+ years
Type Your Hyundai Question Here...
George H. is online now
A new question is answered every 9 seconds

My 2005 Hyundai santa fe 2.7L has no acceleration. It was

Customer Question

my 2005 Hyundai santa fe 2.7L has no acceleration. It was fine when I parked it got in it the next day and noticed the loss right away and has gotten worse. I have replaced the plugs,wires,coil packs and removed the catalytic converter. Originally on my scan tool I was getting codes 301,304, and 300. Now after I did what was mentioned above I get these codes 303,306,300,353pd,356pd,303pd. I am out of ideas it has a slight miss at idle but revs up fine.
Submitted: 1 year ago.
Category: Hyundai
Expert:  Jeromy Madison replied 1 year ago.

Have you checked the crankshaft sensor and camshaft sensor?

Customer: replied 1 year ago.
No. Can I test them or just look for broken wires? The car will start fine and move just slowly.
Expert:  Jeromy Madison replied 1 year ago.

Yes. Check both of these.