HVAC

Have HVAC questions? Ask an HVAC Expert for answers

Connect one-on-one with {0} who will answer your question

Related HVAC Questions
Goodman GS90904cxa warm air furnace falts out before it
Goodman GS90904cxa warm air furnace falts out before it reaches the temperature the thermostat is calling for . It starts the flame comes on and the air circulating motor comes on and faults out befor… read more
Rick
Rick
Supervisor
28,316 satisfied customers
I am having trouble with a 340mav furnace. It all started
I am having trouble with a Bryant 340mav furnace. It all started with a vibrating sound coming through the ducts when the furnace would start. This would happen every time the furnace starts, and has … read more
Twa252842
Twa252842
Handyman / Owner Operator
Vocational, Technical or Trade School
443 satisfied customers
The Heatmaker II was working until we switched it off before
Hello, the Heatmaker II was working until we switched it off before going away. Power is on but cycle doesn't seems to start: no purge noise, no flame, etc... What might be causing this? … read more
Rick
Rick
Supervisor
28,316 satisfied customers
Carrier Infinity 96 gas furnace. Was getting a flashing
Carrier Infinity 96 gas furnace. Was getting a flashing light 14. Turned it off and back on. Now light is staying on which tells me control has 24 VAC power. No noise from the furnace. seemed like ver… read more
airheatman
airheatman
Heating & Air Conditioning Contractor
6 years college
9,925 satisfied customers
I have a Gibson power vent 90+ propane furnace. The problem
I have a Gibson power vent 90+ propane furnace. The problem is intermittent. The induction fan starts,the surface ignitor glows,the burner comes on for a couple seconda then goes off. The red light fl… read more
Phil
Phil
Mechanical Engineer
Degree, Mech Engr Technology
8,427 satisfied customers
Working on an old Grimsby Oil Furnace. It cut struck by lightening
Working on an old Grimsby Oil Furnace. It cut struck by lightening which destroyed the primary control and sensor. I replaced sensor and primary control #R7284 . An electronic primary control. The pro… read more
Rick
Rick
Supervisor
28,316 satisfied customers
I have a commercial train unit serial number is XXXXX
I have a commercial train unit serial number is XXXXX The contactor is not pulling in can you help me diagnose the problem?… read more
Certified HVAC Service Technician
Certified HVAC Service Technician
Welder
Vocational, Technical or Trade School
4 satisfied customers
goodman gmpn080-4 blower does not shut off prior to ignition Old
goodman gmpn080-4 blower does not shut off prior to ignition Old circuit board has a stuck relay and will not turn off the fan upon reaching set temperature. I banged on the relay and worked for two m… read more
warmneighbor
warmneighbor
owner
Vocational, Technical or Trade Scho
162 satisfied customers
I have a Heil NUG5100BHB2 unit. Similar problem the ignitor
I have a Heil NUG5100BHB2 unit. Similar problem the ignitor heats up but there does not appear to be any gas getting thru. My AC A-coil sits on top of this unit and had a leak a couple of months ago s… read more
BillyHvac
BillyHvac
Journeyman Service Technician
State Licensed Mechanical Contractor
14,356 satisfied customers
I have a williamson 2 stage gas furnace.It starts its cycle...induction
I have a williamson 2 stage gas furnace.It starts it's cycle...induction motor...igniter glows...gas ignites but when fan comes on, moter and gas shut off. Fan runs about 20 seconds then the cycle sta… read more
Tim H.
Tim H.
Lead building engineer
Vocational, Technical or Trade Scho
3,962 satisfied customers
I have a xe80 furnace. Upon call for heat- induction fan comes
I have a xe80 furnace. Upon call for heat- induction fan comes on, ignitor glows, gas valve opens, burners ignite for 1-2 seconds then shut off. system retries in same sequence 8-10 more times before … read more
BillyHvac
BillyHvac
Journeyman Service Technician
State Licensed Mechanical Contractor
14,356 satisfied customers
I have a Lennox G26Q4/5-100 furnace. Burners are not starting
I have a Lennox G26Q4/5-100 furnace. Burners are not starting at times and turn off during heat demand on other occations. If the induction blower starts on heat demand the burners will light. If the … read more
airheatman
airheatman
Heating & Air Conditioning Contractor
6 years college
9,925 satisfied customers
Hello I have a seven year old Nordyne furnace. When the stat
Hello I have a seven year old Nordyne furnace. When the stat calls for heat the aux fan starts as it should. The ignitor glows but it will not light the first few times. The valve clicks and gas does … read more
BillyHvac
BillyHvac
Journeyman Service Technician
State Licensed Mechanical Contractor
14,356 satisfied customers
I have a coleman furnace installed in 1994 model #DGAT090BDD.
I have a coleman furnace installed in 1994 model #DGAT090BDD. The green light is steady flashing which does not match any of the fault codes. I can get the light to remain steady by turning the power … read more
ComfortZone
ComfortZone
Associate Degree
515 satisfied customers
My Goodman furnace quit working yesterday. The thermostat indicated
My Goodman furnace quit working yesterday. The thermostat indicated low batteries. I changed the batteries, the furnace keeps kicking off. It gets down to 61 and stays at that temp. When I turn the sw… read more
Rick
Rick
Supervisor
28,316 satisfied customers
I have a Bryant 383KAV furnace. Every so often it will shut
I have a Bryant 383KAV furnace. Every so often it will shut itself off. Moreso on colder days. It appears to be overheating. I just read that this model has a safety design that will shut itself off d… read more
Mark Henley
Mark Henley
HVAC Controls DDC
3,216 satisfied customers
I have an Amana propane furnace for central heating my house.
I have an Amana propane furnace for central heating my house. The unit is 3 years old and has been off for the summer. It has an electric ignitor.I am trying w/o success to turn it on. Don… read more
Rick
Rick
Supervisor
28,316 satisfied customers
The electronic ignition on my Rheem Quiet 80 furnace does not
The electronic ignition on my Rheem Quiet 80 furnace does not trigger. I have two identical furnaces. I tested the other and it works fine. On the functional unit, I can view the flame from the view w… read more
Rick
Rick
Supervisor
28,316 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Phil

Phil

Mechanical Engineer

8,427 satisfied customers

Retired HVAC/ Electrical & Boiler contractor. Industrial

Rick Mather

Rick Mather

HVAC Technician

3,133 satisfied customers

35 years experience, HVAC

Matthew

Matthew

HVAC Technician

2,014 satisfied customers

14 years experience in the HVAC field of service, installation, Manual J & D calculations

Brian HVAC Guy

Brian HVAC Guy

HVAC Technician

1,029 satisfied customers

I have been an HVAC/R mechanic/technician for 30+ years.

Kenton Guidry

Kenton Guidry

HVAC Technician

963 satisfied customers

12 years install/service experience.

Tom

Tom

HVAC Technician

770 satisfied customers

16+yrs HVAC/R service. Residential Commerical Industrial

A-1 Tech

A-1 Tech

Service Manager

526 satisfied customers

I have been in the HVAC business for over 40 years.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x