How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Getting 8-2 code runcap was bad, compressor is not hot. 4

Customer Question

getting 8-2 code runcap was bad, compressor is not hot.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: 4 hours
JA: Do you plan on doing the work yourself?
Customer: HVAC is here now
JA: Are you an HVAC professional?
Customer: pro is here right now
JA: Anything else we should know to help you best?
Customer: just need more detail on 8-2 thermal code
Submitted: 2 months ago.
Category: HVAC
Customer: replied 2 months ago.
runcap was swollen and has been replaced. getting thermal code 8-2. Carrier 24APA560A300
Expert:  gotoman for ac replied 2 months ago.

Russ here. On your system you must turn off power to inside and outside unit to clear faults. If you have done that procedure have you compressor tried to start. Russ