How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Bodenheimer Your Own Question
Charles Bodenheimer
Charles Bodenheimer, HVAC Mechanic
Category: HVAC
Satisfied Customers: 78
Experience:  Owner at BoMech Solutions
Type Your HVAC Question Here...
Charles Bodenheimer is online now
A new question is answered every 9 seconds

Second opinion] whynet sno air conditioner, just started and

Customer Question

Second opinion] whynet sno air conditioner
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: just started and I have cleaned the filters. but when i start it up the green light still flashes
JA: Do you plan on doing the work yourself?
Customer: yes it should only be the filters right
JA: Anything else we should know to help you best?
Customer: i have to use the remote to turn it on and off the so called start button does not seem to work
JA: Just to clarify, what's the make and model of the appliance? And has it done this before?
Customer: Arx=13W/S No it just started this season
Submitted: 4 months ago.
Category: HVAC
Expert:  Charles Bodenheimer replied 4 months ago.
Make sure the water is drained from the tank. After that try pushing the T10 button on the remote. This is a reset button. Also so you have the manual? If not I can send you a link. Thanks for choosing
Expert:  Charles Bodenheimer replied 4 months ago.
Lmk. I'm logging off. I'll be back on tomorrow afternoon est. thanks