How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, HVAC Supervisor
Category: HVAC
Satisfied Customers: 21385
Experience:  40+ yrs. experience as a licensed oil & gas technician.
94766
Type Your HVAC Question Here...
Rick is online now
A new question is answered every 9 seconds

Can you recommend a flaring tool and torque wrenches for

This answer was rated:

Can you recommend a flaring tool and torque wrenches for split system installations ? Also, is it worth getting a ratcheting flare tool?
Thanks

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

This Ridgid is a good choice
http://www.homedepot.com/p/RIDGID-377-Flaring-Tool-41162/202826742?MERCH=REC-_-SearchPLPHorizontal1_rr-_-NA-_-202826742-_-N

What's the torque wrench for?

Customer: replied 3 months ago.
To tighten the flare connections. I'm installing Fujitsu minisplits
Rick and other HVAC Specialists are ready to help you
Customer: replied 2 months ago.
I'm trying to figure out what size torque wrenches I need. Is it true that fujitsu use metric sized flares? If so what size would I need for a 1/2 inch line set?Thanks