How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I need a new thermocouple for Adesa fireplace are

Customer Question

I need a new thermocouple for Adesa fireplace are non-venting
JA: Just to clarify, what type of fireplace is this?
Customer: This is got to be about 15 years old and it's a non-venting tight but works great
JA: Do you plan on doing the work yourself?
Customer: What I'm looking for is a new thermal couple the other one burned out so it's just all I need for right now is that I have two leads in the end go to the valve
JA: Anything else we should know to help you best?
Customer: No I just about it if I can see a picture of it I'll know what it is
Submitted: 9 months ago.
Category: HVAC
Expert:  Appliance Tech Care replied 9 months ago.

Hello and thanks for using JA!

My name is ***** ***** I have been repairing appliances for over 40 yrs and I will be assisting you tonight in trying to find out why your appliance is not working. Sometimes, there will be lapses in my replies back to your because of the volume of questions I am answering. But, please be assured that I will be giving you my best effort to help solve your problem.
Give me a few minutes to check out the info you have provided, so I can give you an accurate answer.

Expert:  Appliance Tech Care replied 9 months ago.

Does it look like this or is the end smaller?

click here

May I ask that you provide me the correct model and serial number off the label on your machine?