How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Just installed a new smart thermostat now I cannot get the

Customer Question

Just installed a new smart thermostat now I cannot get the furnace to turn on:(
JA: Just to clarify, do you think this is a larger HVAC problem, or something specific to the thermostat?
Customer: It was beige weird either being way too hot or not running for long periods of time so I thought it was the temp controlled on the old mercury therm
JA: Do you plan on doing the work yourself?
Customer: Hopefully as its cold and I don't want to pay emergency service
JA: The HVAC Technician's require payment for their services. It's way less expensive on JustAnswer than face-to-face would cost.
Customer: Ok
JA: Anything else we should know to help you best?
Customer: I have a multi damper honeywell system I checked the two fuses I could find there good
Submitted: 7 months ago.
Category: HVAC
Expert:  airheatman replied 7 months ago.

What wires went to what terminals and where you put them on new