How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick, HVAC Supervisor
Category: HVAC
Satisfied Customers: 21527
Experience:  40+ yrs. experience as a licensed oil & gas technician.
Type Your HVAC Question Here...
Rick is online now
A new question is answered every 9 seconds

How do I wire the relay on my outside stove to make circ

Customer Question

How do I wire the relay on my outside Taylor stove to make circ pump come on
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Three days trying to figure it out
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: NoI
Submitted: 7 months ago.
Category: HVAC
Expert:  HollynSam replied 7 months ago.

Hello, I can try to help you with this. Is this relay and circulation pump part of the stove or something external that you are trying to connect? Also what is the model of the stove?

Customer: replied 7 months ago.
It's a Taylor out door stove. I put in a new thermstat in house just to work stove I need the theramstat to kick the pump on when it calls for heat I have power to thermostat by using a transformer white wire is there to let the relay know I need power
Expert:  HollynSam replied 7 months ago.

Ok. This sounds like an HVAC issue. I have flagged it to be re categorized and will opt out.

Expert:  Rick replied 7 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. First I’ll need some more info so I have a more complete picture of you situation.

What do you have for a relay?

Customer: replied 7 months ago.
Type 91 relay white rogers
Expert:  Rick replied 7 months ago.

I can advise you if you're willing to use a standard pump control relay. If you want to stick with what you have I'll opt out for another expert.

Customer: replied 7 months ago.
Don't care as long it works
Expert:  Rick replied 7 months ago.

Ok, here is a link to my preferred relay a Taco SR501.

You don't need/don't want to use a transformer with this relay. Here is a link to the wiring diagram. Let me know if you have more questions.

You can get an SR501 at most plumbing supply houses. You don't have to order online. An Argo AR822II is very similar if Taco is not available where you are.