How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Webb-Guy Your Own Question
Webb-Guy, HVAC Mechanic
Category: HVAC
Satisfied Customers: 1989
Experience:  maitenance tech at casto
Type Your HVAC Question Here...
Webb-Guy is online now
A new question is answered every 9 seconds

I have a lennox 4146 model The fan will not turn on, Inside

Customer Question

I have a lennox 4146 model The fan will not turn on
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Inside temp is 83degrees and it is set to72 degrees
JA: Do you plan on doing the work yourself?
Customer: Ash couple hours I'm at my girlfriends parents house
JA: Anything else we should know to help you best?
Customer: They are out of town
Submitted: 8 months ago.
Category: HVAC
Customer: replied 8 months ago.
Expert:  Webb-Guy replied 8 months ago.

Hello and welcome to just answer my name is ***** ***** I will be the one to assist you. Have you tried turning off the breaker for 5 minutes and see if that will reset it?

Customer: replied 8 months ago.
took the battery out of the thermostat
Customer: replied 8 months ago.
It's on permanent hold or it says following schedule
Customer: replied 8 months ago.
I'll be back on in 15 min
Expert:  Webb-Guy replied 8 months ago.

what mode do you have the thermostat on?

Customer: replied 8 months ago.
It's on auto
Customer: replied 8 months ago.
Customer: replied 8 months ago.
Set to 73 and inside temp is 82
Customer: replied 8 months ago.
Under where it says what the temp at urethane to says following schedule revovery
Expert:  Webb-Guy replied 8 months ago.

If the fan set-ting is scheduled, press the FAN key, then press the desired fan setting to manually override the scheduled fan setting.Fan operation will return to the programmed operation when the next schedule period begins

Expert:  Webb-Guy replied 8 months ago.


1 − Press the SCHED key. The SCHEDULE screen will be displayed.

2 − Press the EDIT key. The screen will change to display the days of the week across the top

3 − Select any combination of days to edit. You may select multiple days.

These should be days that you wish to follow the same schedule. Check marks appear next to the days that are selected. After the first day is selected, the SCHEDULE screen returns to the display.

4 − Press the WAKE key. The WAKE key will flash to show it is selected.

5 − Press the UP and DOWN keys to modify time and heat and cool temperatures shown on the screen.

6 − Press LEAVE key and repeat step 5

7 − Press RETURN key and repeat step 5

8 − Press SLEEP key and repeat step 5

NOTE − The FAN setting can be programmed for ON, AUTO

or CIRC for each period selected. See following page for

more information about fan setting options.

9 − Press DONE key when finished. Saving changes screen appears to indicate that schedule changes are being saved to

the days selected.

10 − Repeat steps 1 through 9 to set a program schedule for the remaining days of the week.

Example: If Mon − Fri

was selected first, repeat steps 1 through 9 to program Sat and Sun. NOTE − To exit the schedule without saving changes, press CANCEL key at any time

Customer: replied 8 months ago.
put the fan setting on auto...
Expert:  Webb-Guy replied 8 months ago.

sorry for the delay in response it was really late my time. I am hoping you are not still having this issue.