How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

INSTALLED THERMASTAT AND IT DOESNOT TURN ON

Customer Question

INSTALLED THERMASTAT AND IT DOESNOT TURN ON
Submitted: 7 months ago.
Category: HVAC
Expert:  airheatman replied 7 months ago.

Did you turn off power to furnace before starting? If not look in furnace to see if a fuse is blown on circuit board.

http://i.imgur.com/UxPpnn4.png

http://i.imgur.com/kYe4Epz.png

Customer: replied 7 months ago.
I unplugged the unit in my attic
Customer: replied 7 months ago.
Are you still there?
Expert:  airheatman replied 7 months ago.

Tell me what wires went to what terminals on old and where you have them on new.

I am here but working with several people so be patient while I type.Thanks

Customer: replied 7 months ago.
OK I will what for call
Expert:  airheatman replied 7 months ago.

I am unable to take phone call right now. This will be presented to my colleagues so you may get a call from one of them if available.We can continue here to try to solve your problem.Tell me what wires went to what terminals on old and where you have them on new

Customer: replied 7 months ago.
I wired it like the diagram said
Expert:  airheatman replied 7 months ago.

Tell me what wires went to what terminals on old and where you have them on new

Related HVAC Questions