How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a lennox el296dfe with error code E200 hard lock

Customer Question

I have a lennox el296dfe with error code E200 hard lock out,how can I reset?
JA: How old is the appliance? Have you gotten error messages before?
Customer: 3 weeks old , ran out of propane and switch to another tank.
JA: Do you plan on doing the work yourself?
Customer: yes if possible.
JA: Anything else we should know to help you best?
Customer: Know furance 3 wks old, ran out of propane and switched tanks. want light error e200
Submitted: 9 months ago.
Category: HVAC
Expert:  Phil replied 9 months ago.

Hello, to reset remove the panel over the gas valve and burner area, look for 2 or 3 black plastic devices about the size of a 50 cent piece with a red button on them, push the button, if one of them clicks when you push it, you have reset the furnace.

Look for any other similar item inside the burner area and reset it it as well.

let me know what you can discover, We can go from there

Customer: replied 9 months ago.
there are no black devices with red buttons in the gas valve area or the fan area. there is a 3amp fuse next the door switch that leads to electronic board but this appears not to be tripped.
Customer: replied 9 months ago.
Would pictures help?
Expert:  Phil replied 9 months ago.

Hello again click here for the manual

roll out switches are shown on figure 14 page 19

Expert:  Phil replied 9 months ago.

look for them at the burner area, 1 inch above where the burners enter the fire box