How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My reem air and gas heat both went to running at the same

Customer Question

My reem air and gas heat both went to running at the same time I have no heat it won't cut off when set on heat they continue to run
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: The thermostat is fine settings are fine
JA: Do you plan on doing the work yourself?
Customer: I do I have no money but have electric appliance ecper
JA: Anything else we should know to help you best?
Customer: it just done it own its on
Submitted: 9 months ago.
Category: HVAC
Expert:  Phil replied 9 months ago.

Hello, locate the printed circuit board in the furnace/air handler...it should be mounted on the blower. Next tell me what terminal letters have wires attached, and what colors those wires are. We can go from there