How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Well, Craig. I have a Kenmore DC 80 furnace. It stopped

Customer Question

Well, hello Craig.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: I have a Kenmore DC 80 furnace. It stopped working. The programmable thermostat had dead batteries, so I replaced those and re-programed the thermostat. No luck. Checked the fuse. It's ok. Looked everywhere for a re-set button, no luck.
JA: Can you guesstimate how old your Kenmore is? And just to clarify, what's the exact model?
Customer: How to start it up. Seems fairly new.
JA: Do you plan on doing the work yourself?
Customer: it was in the house when I bought the place about 5 years ago.
JA: Anything else we should know to help you best?
Customer: Not that I can think of.
Submitted: 7 months ago.
Category: HVAC
Expert:  airheatman replied 7 months ago.

Disconnect R and W at thermostat and touch the wires together and see if heat comes on.Do same with R and G and see if fan comes on.We will go from here.

Related HVAC Questions