How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Roll out limt is setting out. Three times reset system. I am

Customer Question

roll out limt is setting out
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: three times reset system
JA: Do you plan on doing the work yourself?
Customer: yes i am maint tech
JA: Anything else we should know to help you best?
Customer: i have ciean unit and change filter check dischage and intake ok
JA: Did you double-check the thermostat? And what about the unit's filters?
Customer: Yes on filter Gas company installed new green thermostat lol
Submitted: 10 months ago.
Category: HVAC
Expert:  Rick replied 10 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. First I’ll need some more info so I have a more complete picture of you situation

Are you saying you press the rollout reset and the unit starts up but then the reset trips again?

Customer: replied 10 months ago.
No it try to start it locks out code 13 it done it three differ times I have to reset limy reset unit to clear code on board
Expert:  Rick replied 10 months ago.

What is the brand and model number of your unit?

Customer: replied 10 months ago.
Payne 90 plus I do not model number on me sorry
Expert:  airheatman replied 10 months ago.

Are you having to push the reset button on rollout or turn power off and back on to furnace to clear the code?

Customer: replied 10 months ago.
Expert:  airheatman replied 10 months ago.

Which one?

Customer: replied 10 months ago.
Turn off power to reset board it code 13 lock out
Expert:  airheatman replied 10 months ago.

Are you at location of unit?

Can you give me complete model from inside furnace in burner compartment so I can provide guidance with this specific unit.Model will be on a label just above burners on right or left inside panel

http://i.imgur.com/U8b0GXT.jpg

Customer: replied 10 months ago.
Payne 90 plus model number is *****
Expert:  airheatman replied 10 months ago.

OK we need to check continuity between the 2 red wires at the PL1 connector to see if one of the limits is actually opened.Do you have a continuity meter to do this?