How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8169
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

My E1eh furnace heating elements are staying on, themostat

Customer Question

My E1eh furnace heating elements are staying on
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: themostat is set correctly and filter is clean
JA: Do you plan on doing the work yourself?
Customer: If I can
JA: Anything else we should know to help you best?
Customer: I can hear the safety switches clicking in and out If I turn the thermostat up it works fine but when the setting is reached the fan shuts off but the elements do not
Submitted: 8 months ago.
Category: HVAC
Expert:  airheatman replied 8 months ago.

This is most likely a bad sequencer. If you have a voltmeter check power to sequencer coil.If not getting 24v (which you most likely are not) and elements are staying on replace the sequencer.

Related HVAC Questions