How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Kenton my Trane isn't starting up checked the gas supply and

Customer Question

Hey Kenton my Trane isn't starting up checked the gas supply and tried cutting power and restarting
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: just the last 30 minutes or so it was working last night
JA: Do you plan on doing the work yourself?
Customer: if it's simple enough i'm confident I can troubleshoot for it but if there's damage to something in the circuit then I may need help
JA: Anything else we should know to help you best?
Customer: i have the XR80 with a Honeywell thermostat. the thermostat is set to heat, but just shows 'wait'. the fan works, however. after starting up the light just flashes, i think it's a 3 blink code but may have to double check that
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: doublechecked the settings, it should be heating but just shows 'wait' for the filter, it was out of the slot, but i put it back in place
Submitted: 10 months ago.
Category: HVAC
Expert:  BillyHvac replied 10 months ago.


my name is Billy.

Can you tell me if the exhauster fan is starting and running during the 3 blink code?