How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Just had the fan out cuz it was really shaking, nothing

Customer Question

Just had the fan out cuz it was really shaking, nothing else. I had disconnected the fan connector. When I took out the fan and shroud. Put everything back together. Discovered i lead had disconnect from the switch next to the fan shroud.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: When I tried to restart the furnace I got absolutely nothing . It looks likt the electical ignitor is not tryiing go start at all
JA: Did you check the furnace's filters?
Customer: brand new
JA: Do you plan on doing the work yourself?
Customer: yes. I have HVAC experience. Electrical diagrams of the furnace are gone. at least 15 years old. so it's hard dor me to figure what safety switch might be preventing the igniter from working
JA: Anything else we should know to help you best?
Customer: please pardon poor typing
Submitted: 10 months ago.
Category: HVAC
Expert:  BillyHvac replied 10 months ago.

hello, can you post a pic of the wire and the area it came off from?