How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8164
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

Pearl, I am looking for parts for Lennox model # GH080FE

Customer Question

Hi, Pearl, I am looking for parts for Lennox model # GH080FE series NAGTE
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: Just started searching.
JA: Do you plan on doing the work yourself?
Customer: yes.
JA: Anything else we should know to help you best?
Customer: the blower wheel needs to be replaced. I am also thinking the we should put in a new motor while we have it apart.
Submitted: 8 months ago.
Category: HVAC
Customer: replied 8 months ago.
The furnace was in the house when I bought it in 1987. I think the house was built about 1980, but not sure.
Expert:  airheatman replied 8 months ago.

May be hard to locate parts for this by the model number due to age.

The easiest thing to do is to remove the blower assembly an disassemble. At that point, measure the diameter of the wheel as well as the width and rotation.You can determine rotation by turning by hand to see which way the blades would scoop up air. As for the motor we can use a universal motor, by getting the nomenclature (volts, hp, amp draw, ec)from motor once it is removed.

I will be happy to guide you and help you find wheel and motor.

Video below will give you an idea as to how to dissasemble. Also note it is highly possible there will be a label on the old wheel that will help us locate replacement number.

Customer: replied 8 months ago.
the blower wheel is 11" diameter x 6" wide. hole for shaft is 1/2"
It turns clockwise.
Customer: replied 8 months ago.
i want to know where to find a blower wheel. please.
Expert:  airheatman replied 8 months ago.

Give me a few minutes to do some research

Related HVAC Questions