How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have reznor gas heater suspended in my garage and had to

Customer Question

I have reznor gas heater suspended in my garage and had to change the mercury thermostat and was warned that the pilot light hat to be in the flame and centered. How do I get to this unit. The heater is closed and running however, shuts down after the first blast of hot air.
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: I dont remember seeing any filters
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: what side do I need accsess to get to the heater flame that the sensor needs to be in
Submitted: 11 months ago.
Category: HVAC
Expert:  airheatman replied 11 months ago.

I will need the model from the unit to be specific on location of the flame sensor or thermocouple