How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gaztech Your Own Question
Gaztech, HVAC Technician
Category: HVAC
Satisfied Customers: 456
Experience:  Owner at Gaztech
Type Your HVAC Question Here...
Gaztech is online now
A new question is answered every 9 seconds

I have a used goodman multi-position gas furnace want to

Customer Question

I have a used goodman multi-position gas furnace want to install in garage questin gas control switch is inplace do I also need gas control valve and where do I put thermostat wires
JA: Did you double-check the thermostat? And what about the pilot light?
Customer: did not add thermostat yet pilot light looks ok but no gas hook up yet
JA: Do you plan on doing the work yourself?
Customer: yes retired sheet metal worker but things have changed my job was installation and burner service
JA: Anything else we should know to help you best?
Customer: I can handel sheet metal but unsure about gas valve and wireing
Submitted: 8 months ago.
Category: HVAC
Expert:  Gaztech replied 8 months ago.

Welcome to Just Answer, my name is Luke

NOTE: I can only get credited for assisting you if you click the 5 star rating when we are done

What is the model number, you will find it inside top compartment

Expert:  Gaztech replied 8 months ago.

Thermostat wire go to the control board in the blower compartment

Attach the 2 wire to terminal R and W and the same at t-stat. if your t-stat has Rh and Rc, put a jumper between them.

as for hooking up the gas line, it requires a shut off valve before you ent furnace.