How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8258
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

My edenpure turns on and the fan runs but there is no heat.

Customer Question

my edenpure turns on and the fan runs but there is no heat. I did check the fuse in the control module with a tester and it is good
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: the thermostat is all the way up and the filter is clean.
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: do I replace the control module?
Submitted: 9 months ago.
Category: HVAC
Expert:  airheatman replied 9 months ago.

Do you have a volt meter to ohm out the heating element?

Customer: replied 9 months ago.
Expert:  airheatman replied 9 months ago.

Which Edinpure do you have?

Customer: replied 9 months ago.
gen4
Customer: replied 9 months ago.
gen 4 model A4428
Expert:  airheatman replied 9 months ago.

Below is a video that will help you access the elements.Lets start by unplugging and ohming each element

https://www.youtube.com/watch?v=zJ0So55j5CE

Expert:  airheatman replied 9 months ago.

Below is a troubleshooting guide we will follow.

Test ohms

Visually examine for cracks ,breaks or discoloration

Test high limit for continuity

Customer: replied 9 months ago.
All three elements are bad
Expert:  airheatman replied 9 months ago.

I believe these re the elements you wll need, but recommend verifying from Edinpure before ordering

http://www.edenpureparts.com/bulb-us001

Thanks for letting me work with you.If my answer has been polite, professional,and thorough, please click one of the ratings before you go. If you still need help let me know!.Expert is not paid for assisting you until you rate answer.Feel free to follow up for 30 days at no additional cost. Bonus always appreciated if you feel justified.

To rate answer, please select one of the stars on the page.

Related HVAC Questions