How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8164
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

Were is the heat sensor located on a RUUD Deluxe 80 Plus

Customer Question

were is the heat sensor located on a RUUD Deluxe 80 Plus furnace ? My burner starts up and shuts off ri
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: Yes on both
JA: Do you plan on doing the work yourself?
Customer: if posible I had a service tech look at it last week and he said the would get back to me and I called again and still have not received return call
JA: Anything else we should know to help you best?
Customer: I replaced the inter because the one that was in there did not seem to light up as much
Submitted: 9 months ago.
Category: HVAC
Expert:  airheatman replied 9 months ago.

It is a single steel rod about 2" long sticks in burner flame on opposite side from the igniter.It can be cleaned using a dollar bill or fine sand paper.Below is a generic video showing how to do this,Will be slightly different from your furnace but will give you a good idea.

https://www.youtube.com/watch?v=tYwR9qL4lnk

Related HVAC Questions