How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have Tempstar furnace Model N8Mpn050B 12A1. The ignition

Customer Question

I have Tempstar furnace Model N8Mpn050B 12A1. The ignition sequence starts then stops after a minute. The LED flashes once followed by 6 flashes. Is there something I can trouubleshoot?
Submitted: 12 months ago.
Category: HVAC
Expert:  Rick replied 12 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

A 6 flash error is a generic flame failure error. Turn the power off to the unit wait a couple minutes then turn it back on and tell me what happens. Where in the cycle does it shut down?