How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My board on my goodman gmh was damaged by water. I replaced

Customer Question

My board on my goodman gmh was damaged by water. I replaced the board and the furnace turned on. The burners lit but the blower did not kick on. The furnace shut of and will not start again. There is no red led.
JA: Did you check the furnace's filters?
Customer: Yes. Filter is dirty but still wont start with the filter out.
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Thats all i have done up to this point
Submitted: 11 months ago.
Category: HVAC
Expert:  BillyHvac replied 11 months ago.


My name is ***** ***** I will do my best to assist you. I am looking over your question now and will respond shortly.

Expert:  BillyHvac replied 11 months ago.

can you tell me what terminals the blower wires are on?