How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8269
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

How do you remove blower assembly on the AWUF air handler

Customer Question

How do you remove blower assembly on the AWUF air handler
Submitted: 11 months ago.
Category: HVAC
Expert:  Webb-Guy replied 11 months ago.

Do you see the screws at the top of your blower motor? There should be some wires as well that will need to be disconnected first?

Customer: replied 11 months ago.
There isn't enough room to slide the blower assembly out because the coil is in the way
Expert:  Webb-Guy replied 11 months ago.

What is your goodman model number so I can pull up a diagram to look at for you. Cause the coil shouldnt be in the way. Are you referring to the line set?

Customer: replied 11 months ago.
AWUF300816BA it's a wall mounted unit
Expert:  Webb-Guy replied 11 months ago.

ok I am not as familiar with the wall mounted units so I will open this up for other experts to see if they may have a better idea.

Expert:  airheatman replied 11 months ago.

You will need to remove the electrical panel in front of blower, then remove blower assembly brackets .See below