How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8327
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

Furnace fan runs continually

Customer Question

Furnace fan runs continually
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

What is model on unit ?

Customer: replied 1 year ago.
Olsen NG furnace model G95V080-3, sn3108A014543, blower fan does not shut off.
Expert:  airheatman replied 1 year ago.

The G95V080-3 utilizes what is called an ECM variable speed motor, Two basic things will cause the issue. The control board or the bell control on the end of the motor.Since you have already replaced board and that did not solve issue, It is going to be a bad control bell.

Expert:  airheatman replied 1 year ago.

It looks like from serial number your furnace was manufactured in January 2008 . Many of these units carried a 10 year warranty if registered at time of purchase. Five if not.

If not under warranty the bell is probably 400 to 500 dollars and entire kit with bell and motor 800 to 900 dollars.

The most accurate way to test before replacing is to use a special tool designed for testing .

Customer: replied 1 year ago.
Not much help
Customer: replied 1 year ago.
Could I have my money back?
Expert:  airheatman replied 1 year ago.

Sorry there is no magic wand to wave to fix your problem but I have provided an accurate answer to your question and a more than wiling to help you diagnose if you can get the tester.