How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Loud banging in bedroom walls;

Customer Question

loud banging in bedroom walls;smell of fire in that room only, furnace off, tried to turn on did not go on, red blinking light inside
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: furnace is gas and only 4 years old
JA: Is there anything else important you think the HVAC Technician should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the HVAC Technician about your situation and then connect you two.
Submitted: 1 year ago.
Category: HVAC
Expert:  Sean replied 1 year ago.
Hello, Im Sean, I am here to do what I can do to help you!You are my eyes and ears for this problem so depending on your level of handiness we will figure it out.Also remember as experts we only get paid if we get a positive review so we will do all we can to help you. So lets start, Can I have the model number and make of furnace?
Customer: replied 1 year ago.
i will have to get back tomorrow with that info == will that work?
Expert:  Sean replied 1 year ago.
Sure no rush, I do work in the field so please be patient with me responding throughout the day
Customer: replied 1 year ago.
ok thx
Expert:  Sean replied 1 year ago.
Do you still need help?
Expert:  Sean replied 1 year ago.
Do you still need help
Customer: replied 1 year ago.