How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Plourde Your Own Question
Daniel Plourde
Daniel Plourde, HVAC Technician
Category: HVAC
Satisfied Customers: 327
Experience:  hvac technichian at performance plumbing and heating
Type Your HVAC Question Here...
Daniel Plourde is online now
A new question is answered every 9 seconds

My R7284 is on hard lockout, tried resetting but it goes

Customer Question

My R7284 is on hard lockout, tried resetting but it goes right back to that message
JA: Thanks. Can you give me any more details about your issue?
Customer: I hit the reset as instructed for a couple of seconds but I see from posts holding it for at least 10 seconds is what I should be doing??
JA: OK got it. Last thing — HVAC Technicians generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
any suggestions ??
Customer: replied 1 year ago.
Error message - Cad Cell high during run
Customer: replied 1 year ago.
what needs to be done with that type of message?
Expert:  Daniel Plourde replied 1 year ago.
Hi i am dan. I can help you with this. If it still locks out after resetting then there is a problem and it needs to be addressed before resetting again. Do you hear or see the flame come on after resetting?
Customer: replied 1 year ago.
I see a flame and cleaned the lense and that solved the issue with it not running after start up.
Expert:  Daniel Plourde replied 1 year ago.
Ok so is it all good now or did you have any more questions about anything or need any help?