How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Are you real? Well I got a Rudd silhouette II furnace that

Customer Question

Hi are you real?
JA: No. I'm the HVAC Technician's Assistant.
Customer: Well I got a Rudd silhouette II furnace that start all good you set a temp let's say 70 and start working just fine and then just stop working never reach the set temp
JA: I'll do all I can to help, Rudd silhouette. Tell me a bit more about what's going on so we can help you best.
Customer: I told u star working just fine and then stop working.... If we turn it off and then on star working again but then stop working again
JA: Is there anything else important you think the HVAC Technician should know?
Customer: No I don't thing so that's it
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the HVAC Technician about your situation and connect you two.
Submitted: 1 year ago.
Category: HVAC
Expert:  Rick replied 1 year ago.

What is the model number of your furnace? you can find it on the rating tag inside the burner compartment

Customer: replied 1 year ago.
I'm not available now to see it I just know is a Rudd silhouette II
Customer: replied 1 year ago.
Hello are u there?
Expert:  Rick replied 1 year ago.

I need the actual model number to help you

Expert:  Rick replied 1 year ago.

This will require that you're onsite next to the unit to trouble shoot this problem

Customer: replied 1 year ago.
Ok let me see
Expert:  Rick replied 1 year ago.

Let me know when you're at the unit and ready to troubleshoot. Please don't respond again until you are