How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

On my carrier 9200, I get an error code 34, and my igniter

Customer Question

On my carrier 9200, I get an error code 34, and my igniter does not glow red. I am getting around 80 ohms from the igniter. When I blow/suck on the tube on top of the pressure switch it clicks, but not when I do on the hose on the bottom.
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.

hello,

can you please post a picture of your ignitor?

Customer: replied 1 year ago.
I will pull it out when I get home.
Customer: replied 1 year ago.
I actually just got home and it's working now. I did empty out the condenser tank and blow out all the lines, so maybe that had something to do with it. Thank you for your time.