HVAC

Have HVAC questions? Ask an HVAC Expert for answers

Ask an Expert,
Get an Answer ASAP!

I have 80 with electric ign. Will not fire 4 th stage I have…

Customer Question
I have Bryant 80 with...
I have Bryant 80 with electric ign. Will not fire 4 th stage I have cleaned flame senior still no ign. Help
Submitted: 2 years ago.Category: HVAC
Show More
Show Less
Ask Your Own HVAC Question
Answered in 1 minute by:
2/13/2016
HVAC Technician: BillyHvac, Journeyman HVAC Tech replied 2 years ago
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 23,152
Experience: Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Verified

hello,

this will require actually removing the burners and tapping rust or debris out. You have a an obstruction....it could be the tiniest flake but it impedes the flame crossover. Are you able to remove the burners?

Ask Your Own HVAC Question
Customer reply replied 2 years ago
how do I clean without doing harm
HVAC Technician: BillyHvac, Journeyman HVAC Tech replied 2 years ago

remove burners and use compressed air, or wire brush...the burners are very durable

Ask Your Own HVAC Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a hvac technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Phil Your Own Question
Phil
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 7,426
7,426 Satisfied Customers
Experience: Retired HVAC/ Electrical & Boiler contractor. Industrial

Phil is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

You did one super job of explaining to me everything there is to know about this fridge. I'm looking forward to asking you questions in the future.

JimmyBagley, IA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

< Previous | Next >

Meet the Experts:

Phil

Phil

Mechanical Engineer

7,426 satisfied customers

Retired HVAC/ Electrical & Boiler contractor. Industrial

Rick Mather

Rick Mather

HVAC Technician

3,133 satisfied customers

35 years experience, HVAC

Matthew

Matthew

HVAC Technician

2,014 satisfied customers

14 years experience in the HVAC field of service, installation, Manual J & D calculations

Brian HVAC Guy

Brian HVAC Guy

HVAC Technician

1,024 satisfied customers

I have been an HVAC/R mechanic/technician for 30+ years.

Kenton Guidry

Kenton Guidry

HVAC Technician

963 satisfied customers

12 years install/service experience.

Rick Ridley

Rick Ridley

UK Heating Engineer

871 satisfied customers

Retired But have had 30 years on the tools, Ex CORGI

Tom

Tom

HVAC Technician

770 satisfied customers

16+yrs HVAC/R service. Residential Commerical Industrial

< Previous | Next >

Related HVAC Questions
I wake up and my Lennox G17 is not running. The call
I wake up and my Lennox G17 is not running. The call for heat is on and the damper door is open. Cycling power to the furnace restores it to normal operation. Replaced the BCC2 but that did not fix th… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
I have a code 14 on a bryant furnace due to a dirty filter.
I have a code 14 on a bryant furnace due to a dirty filter. I have replaced the filter, but I am still in lockdown. I can't seem to get it to fire up. What can I do? It is 2:46 am and its 30 degrees o… read more
gotoman for ac
gotoman for ac
HVAC Service manager and owner
Associate Degree
4,135 satisfied customers
Bryant Plus 90 propane furnace keeps tripping roll out switch,
Bryant Plus 90 propane furnace keeps tripping roll out switch, Took the combustion box apart, cleaned the burner tubes (phenolic ends had several plugged holes), replaced the flame proof and hot surfa… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
I have a york 80% furnace. model # P2MPD12N06401E. Vent and
I have a york 80% furnace. model # P2MPD12N06401E. Vent and blower motor start immediately and continue to run after the call for heat. Igniter won't glow and of course there is no flame and no heat. … read more
Tim H
Tim H
Lead building engineer
Vocational, Technical or Trade Scho
1,922 satisfied customers
My Jotul Lillehamer GF 400 DV stove has a problem: the burner
My Jotul Lillehamer GF 400 DV stove has a problem: the burner won't light. The pilot is lit and stays lit. The stove is new - I've had it for 18 months, had it converted from NG to LP last year when t… read more
Jerry
Jerry
Plumber
High School or GED
1,456 satisfied customers
I have a 1991 Comfortmaker Furnace model GUH060A012IN that
I have a 1991 Comfortmaker Furnace model GUH060A012IN that will not fire. I have 120 VAC to the ignition but will no 24 VAC to the to the gas valve. Induced fan is running when calling for ignition. I… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
I have a Bryant 395CAV036111, 111,000 BTU, Installed 1-4-00.# LED
I have a Bryant 395CAV036111, 111,000 BTU, Installed 1-4-00.# LED code is: 14 - IGNITION LOCKOUT - Control will auto-reset after 3 hours. Refer to #34 Problem: Furnace stops operating. Can restart fur… read more
Tim H
Tim H
Lead building engineer
Vocational, Technical or Trade Scho
1,922 satisfied customers
I have a Bryant Plus 90 furnace that is running with, at best,
I have a Bryant Plus 90 furnace that is running with, at best, XXXXX XXXXX % fire. There seems to be almost nothing coming out the exhaust tube. There is some suction on the supply tube. All three fir… read more
Tim H
Tim H
Lead building engineer
Vocational, Technical or Trade Scho
1,922 satisfied customers
I would like to know the proper way of wiring up a White Rodgers
I would like to know the proper way of wiring up a White Rodgers 50E47-843 Furnace Control Box. I had a WR 50E47-140 and it was bad. I wired up the 843 but it isn't working. Here is how I had it wired… read more
Regan Land
Regan Land
General Manager
Vocational, Technical or Trade Scho
508 satisfied customers
I have a Bryant day & night furnace Payne (elrctronic ign.
I have a Bryant day & night furnace Payne (elrctronic ign. )It clicks clicks, pilot goes on, burners ignite,then burners go out.clicks,clicks,clicks again burners go on then go off,does this about 4-5… read more
Tim H
Tim H
Lead building engineer
Vocational, Technical or Trade Scho
1,922 satisfied customers
My pool heater (Hayward H250IDL2) will not stay lighted. The
My pool heater (Hayward H250IDL2) will not stay lighted. The gas fires up and you can feel the heat from the exhaust but then shutsoff after 4 secs. Eventually gets msg IF for Ign Failure. Any ideas?… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
My Rheem furnace has a robertshaw sp715A ign control and 7100
My Rheem furnace has a robertshaw sp715A ign control and 7100 der gas valve. the thermostst works properly. the pilot ignites properly. The gas valve works properly while the 24v is present from the i… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
bryant gas furnace model # 376cav060115 giving acode of faulty
bryant gas furnace model # XXXXX giving acode of faulty flame sensor , replaced sensor and checked all connections, still showing same code . Igniter comes on, lights furnace for appr.3-4 seconds then… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
Hello, Im replacing a Robertshaw sp715A with the Robertshaw
Hello, I'm replacing a Robertshaw sp715A with the Robertshaw HS780 34PL-308A... Some of the termianls are different and I have no instructions with the new uint. I tested the furnace with a working sp… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
I have a Carrier 58PAV and I am getting error code 34. I cleaned
I have a Carrier 58PAV and I am getting error code 34. I cleaned the flame sensor with steel wool as a local Home Depot recommended, but no change.… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
on an arstrong sx 80,, i have induction motor start up and
on an arstrong sx 80,, i have induction motor start up and the pilot will light but the gas valve does not open to ignite the burners, i have cleaned the flame sensor ,, could this be the blue control… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
I have a mod UGDB-10KC-JR (25 years old) in southern Ca and
I have a mod UGDB-10KC-JR (25 years old) in southern Ca and seldom used. When I turn the thermostat up, the pilot ignites and 30 seconds later the flame comes up, then a loud click and within one seco… read more
BillyHvac
BillyHvac
Journeyman HVAC Tech
23,152 satisfied customers
Heil 80% EFF--- Fires, runs, Shuts off!! ---------------------------
Heil 80% EFF--- Fires, runs, Shuts off!! -------------------------------------------------------------------------------- Heil Model # XXXXX Gas, Forced Hot Air, 80% exhaust into chimney, Calls for he… read more
The Home Smithy
The Home Smithy
Home Improvement Repair Consultant
1,890 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x