How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22541
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Trane xl80: replaced HVAC controller module and furnace now

Customer Question

trane xl80: replaced HVAC controller module and furnace now works fine except that SmartVent thermostat/controller keeps going into Sys Eq mode even though this is a single story house with only one zone. Seems like SmartVent configuration is wrong/broken but I don't know how to get into the "installer menu" to correct the configuration
Submitted: 1 year ago.
Category: HVAC
Expert:  BillyHvac replied 1 year ago.


I am sorry your question has not been addressed yet. I just logged on and noticed no one has helped you yet. Do you still need assistance? Do not "Rate" as we have not worked towards an answer yet.

Let me know if you still need help.

Customer: replied 1 year ago.
The furnace works fine now. Iwould only be interested in help if you have specific ZTech SmartVent configuration experience

Related HVAC Questions