How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8248
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I have v pro th8000 series I want to stop my heat pump from

Customer Question

I have v pro th8000 series
I want to stop my heat pump from running when outside temp is 10 c
How cn I set this up
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

Give me a moment to pull the manual on thermostat

Expert:  airheatman replied 1 year ago.

That will be done in setup menu under function 0350. Do you know how to enter the setup menu?

Customer: replied 1 year ago.
What page on manual
Customer: replied 1 year ago.
Ok but tell me step by step
Customer: replied 1 year ago.
If I leave on em only the red light on rat side comes on
But I want to set it so hp stops running when outside temp comes down to 10 c
Expert:  airheatman replied 1 year ago.

1.Press SYSTEM

2.Press and hold 3rd and 5th button on bottom of thermostat

3.Function 0120 will be displayed first

4. Use the down arrow to scroll to function 0350

5. Use the up or down arrow to sect temp you want to prevent heat pump from running

6.Press Done in left corner of thermostat

Customer: replied 1 year ago.
It's costing me more
Over 70 bucks now
Customer: replied 1 year ago.
On em mode, does it mean furnace is only running on gas
And heat pump os off?
Customer: replied 1 year ago.
I don't see 3 n 5 buttons
Customer: replied 1 year ago.
Can u cancel this n get me refund
Sorry it's not helping me
Expert:  airheatman replied 1 year ago.

Look at the links I sent.This is very simple. The links shoe pictures of the buttons and exactly how to do this.

Expert:  airheatman replied 1 year ago.

Click on this link