How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8386
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I have a heatmor x-series 200... How can I raise the low set

Customer Question

I have a heatmor x-series 200... How can I raise the low set point on my aquastat?
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

Unfortunately you can not change this setting.It should remain ay 50 degrees.Please do not shoot the messenger.I can only provide the truth.If dis satisfied with answer you may request a refund.Leaving a poor service rating will not automatically refund your money,but reflects poorly on your expert. You have to request a refund if not satisfied with the information provided being accurate.

See link below

Expert:  airheatman replied 1 year ago.

Should say 40 degrees not 50 (typo) See link

Customer: replied 1 year ago.
I understand it's set from factory and it shouldn't be changed... But if I wanted too, how can I?
Expert:  airheatman replied 1 year ago.

There are no instructions on changing this setting.I will request a refund of your deposit.DO NOT RATE ANSWER as that will close the question and send back to my desk.I know this is not the answer you were looking for but we are not allowed to over rule instructions from manufacturer due to liability issues. I will request a refund of your deposit.