How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 8382
Experience:  Furnace, A/C and heat pump specialist.
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

During installation we accidentally wired 120 v to the

Customer Question

During installation we accidentally wired
120 v to the control valve, part # ***** on our MOJO series invented gas log set.
Appeared to burn it out, suggestions?
Regards, John
Submitted: 1 year ago.
Category: HVAC
Expert:  airheatman replied 1 year ago.

John if you applied 120vac to the millivolt valve, you will probably have to replace the valve.

Unfortunately this a pretty expensive valve.You see links offering the valve here.