How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Your Own Question
Rick
Rick, HVAC Supervisor
Category: HVAC
Satisfied Customers: 21350
Experience:  40+ yrs. experience as a licensed oil & gas technician.
94766
Type Your HVAC Question Here...
Rick is online now
A new question is answered every 9 seconds

Trying to relight my therm floor heater furnace model

Customer Question

Hi , trying to relight my therm floor heater furnace model 1605-35d
Submitted: 1 year ago.
Category: HVAC
Expert:  Rick replied 1 year ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

Follow the small diameter aluminum tubing connected to the gas control valve into the unit. It terminates at the pilot. That's where you put your lit match. You also need to push and hold down the dial (some gas valves have a separate button) while you light the pilot and for at least a minute after it's lit to give the thermocouple (the flame sensor in the pilot) a chance to heat up

Related HVAC Questions