How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

We have a Baldor Reliance 3ph 230vac 60hz 3600 motor which

Customer Question

We have a Baldor Reliance 3ph 230vac 60hz 3600 motor which gets too hot to touch after running for 30 min with no load. The shaft end bearing was replaced but didn't look bad.
Submitted: 1 year ago.
Category: HVAC
Expert:  AssuredElectrical replied 1 year ago.

Welcome. My name is ***** ***** would be glad to assist.

What voltage is being applied to the motor?

What are the measurements on each phase to ground and phase to phase at the motor?

Do you have an ammeter for testing the current the motor is using?

How is the motor and inverter wiring scheme with each other?

Let me know and we can continue,