How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kcrand36 Your Own Question
Kcrand36, HVAC Mechanic
Category: HVAC
Satisfied Customers: 77
Experience:  Owner at Advantage Repair
Type Your HVAC Question Here...
Kcrand36 is online now
A new question is answered every 9 seconds

I need the thermastst wiring diragram gmvc8 & gsx16 3ton

Customer Question

i need the thermastst wiring diragram for goodman gmvc8 & gsx16 3ton for. nest2 for my installer. hot air ,
Gas fed system
or do i need a nest3 ?
thanks Jack Theall ***@******.*** (###) ###-####
Submitted: 1 year ago.
Category: HVAC
Customer: replied 1 year ago.
multi stage heating & cooling and variable speed blower. to best use these features to there best
Expert:  Kcrand36 replied 1 year ago.

Good Morning. I believe the Nest2 is capable of handling multi stage heat and cool. Are you installing this thermostat right now?

Customer: replied 1 year ago.
Installing Monday
Expert:  Kcrand36 replied 1 year ago.

If system was initially set up with enough wires from furnace to stat, it should be wire for wire terminal designations, however, you may need a "common" wire for the Nest stat. I would suspect if the furnace has been updated recently that it was only wired for single stage because you did not have enough wires run from furnace to thermostat. Could this be the case?

Expert:  Kcrand36 replied 1 year ago.

Hi Jackson,

Just wanted to know how you made out with the installation. Feel free to contact us if you have any questions.

Thanks, Kevin.