How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 8769
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

YHC120A3HA1WD We use an AX35 Belt Pulleys Are Aliened It has

Customer Question

We use an AX35 Belt
Pulleys Are Aliened
It has the correct tension
Why is the Belt Breaking down Every 2 Months
Submitted: 2 years ago.
Category: HVAC
Expert:  Phil replied 2 years ago.

Hello, I need a few pictures.

pictures taken from about 6 feet away that shows both the drive pulley and the blower or compressor wheel pulley from above and from the front.

I need a close up of the motor drive pulley very well lit, and taken from about 12 inches away from the top of the pulley looking down, and very importantly a picture taken looking straight at the motor drive pulley from between the two pulleys.... very well lit.

I need the diameter of the motor pulley, and the speed of the motor.

Use the paper clip icon at the right end of the tool bar to attach the pictures, or the +attach files link to the left of the 'send' button.

We can go from there.