How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22541
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
12672042
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

My AC blower stopped. Repair tech came and pushed reset

Customer Question

My AC blower stopped. Repair tech came and pushed reset button as I watched.
Everything fine for several days. Electric company did a turn off then on and blower did not restart. I did what I saw technician do. Saw flashing green and red lights like when he did it. However, when I release the reset button, the blower turns off again.
Other info - I turned thermostat to OFF and fan to manual on. There was a little icing on the outside condensor, but not as bad as when tech was here.
What do I need to do?
Submitted: 2 years ago.
Category: HVAC
Expert:  BillyHvac replied 2 years ago.
Hello,
when you say "reset" are you referring to the 24v rocker switch on the side of the metal box in blower section?
Use reply
Customer: replied 2 years ago.
The reset on the circuit board behind the cover panels.
Expert:  BillyHvac replied 2 years ago.
Then I will need the model number of the furnace.
There are dozens and the number will put on us on the same page quickly
Customer: replied 2 years ago.
Never mind. I got help from the tech who was here. I did everything right except to put the panel door back on.