How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22624
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

I'm Paul. My heater doesn't switch on in the morning it

Customer Question

Hi, I'm Paul. My heater doesn't switch on in the morning it has -07 on the screen I turn it off then back on and it works what the problem
Submitted: 2 years ago.
Category: HVAC
Expert:  BillyHvac replied 2 years ago.
in order to determine this I will need model number.
Could you get that and respond with reply button please
Customer: replied 2 years ago.
M/n is TH420NG
Expert:  BillyHvac replied 2 years ago.
Thank you.
this is a failed ignition code.
dirty flame sense assembly
low gas pressure
flame not getting to sensor
The sensor must record flame is present in 3 seconds or it shuts down. If you are handy you can access ignitor and clean with steel wool