How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Smith Your Own Question
Andrew Smith
Andrew Smith, HVAC Technician
Category: HVAC
Satisfied Customers: 3629
Experience:  City & Guilds Plumbing and Heating Engineer
Type Your HVAC Question Here...
Andrew Smith is online now
A new question is answered every 9 seconds

Hey Phil , Potterton system , 30/80 , pump working , fan working

Customer Question

Hey Phil , Potterton system , 30/80 , pump working , fan working , flow switch not opening unless I fiddle with the safety valve , then boiler comes on and stayed on , when turned off and turn on again , same problem again , took out flow switch and cleaned it but no good , do I need a new flow switch , or could it be PCb
Submitted: 2 years ago.
Category: HVAC
Expert:  Andrew Smith replied 2 years ago.
Hi my name is ***** ***** I will try and sort your problem in the shortest possible time.
Is this just supplying your hot water?
Customer: replied 2 years ago.
Hi Andrew , the boiler is not a combi boiler , it's a standard system boiler zoned heating a cylinder
Customer: replied 2 years ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Video Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 2 years ago.
Hey Andrew ,is there an extra charge for a phone call .
Customer: replied 2 years ago.
I am a registered gas installer here in Ireland , before if I came across this problem I would take out the flow switch and clean it , that's not working this time , looking for an extra opinion from your self
Expert:  Andrew Smith replied 2 years ago.
Are you able to link the 2 wires of the flow switch, this would have the same affect?
Customer: replied 2 years ago.
I will try that tomorrow and get back to you .
Thank you
Expert:  Andrew Smith replied 2 years ago.
No problem
Let me know