How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22680
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

Morning. My Windsor pellet stove, made by Enviro has a problem.

This answer was rated:

Morning. My Windsor pellet stove, made by Enviro has a problem. The fan goes into hi mode while it is burning, and never backs off. I can't manually back it down either. My technician has cleaned this stove religiously every year, I burn high quality pellets (Hamer Hots), and just this year, the technician replaced a sensor hoping this would solve the issue. Everything mechanically is in top shape, yet this is my problem. It will burn on low for about 20-30 minutes, then kick into high, and never back down...automatically or manually.

Please help!

If the sensor has been replaced...then you most likely have a glitch in the circuit board.

The board is #50-178 if older than 2006.


BillyHvac and 2 other HVAC Specialists are ready to help you