How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22515
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

How do you wire a goodman Model DSXC180481 (2) stage 18 seer

This answer was rated:

How do you wire a goodman Model DSXC180481 (2) stage 18 seer condenser, to a Carrier model 58PAV 111-16 (1) stage furnace using a Honeywell TH8000 thermostat?

since the furnace is not capable of staging, I assume you want the 2 stages of cooling to run at the same time?

Customer: replied 3 years ago.

That's correct.

Then you will run furnace R to thermostat R
White to W
Green to to G
Yellow to Y

Then at furnace you will combine condenser Y1 and Y2 into the Y terminal. You will now 3 wires in Y......Yellow from stat and Y1 and Y2 from condenser. Then a C to C and a R toR.

If you have any issues at all let me know

BillyHvac and 3 other HVAC Specialists are ready to help you