How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BillyHvac Your Own Question
BillyHvac, Journeyman HVAC Tech
Category: HVAC
Satisfied Customers: 22627
Experience:  Endorsed for unlimited heating, cooling, oil burners, boilers, refrigeration, hydronics
Type Your HVAC Question Here...
BillyHvac is online now
A new question is answered every 9 seconds

What if wire was accidently connected to "B" instead of "C"

This answer was rated:

What if wire was accidently connected to "B" instead of "C" on RTH3100C?

it is possible that a fuse blew in the furnace/blower unit.

what is make and model of the indoor unit/

Customer: replied 4 years ago.
Make is Bryant
go to the unit outside. remove the panel where electrical enters. there will be a circuit board with a blade fuse like found in a car. replace this fuse and you should be all set.

BillyHvac and 2 other HVAC Specialists are ready to help you
Customer: replied 4 years ago.
which circuit board am I looking for