How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rick Ridley Your Own Question
Rick Ridley
Rick Ridley, UK Heating Engineer
Category: HVAC
Satisfied Customers: 2708
Experience:  Retired But have had 30 years on the tools, Ex CORGI
Type Your HVAC Question Here...
Rick Ridley is online now
A new question is answered every 9 seconds

how do you get the water pressure back up to 1 bar when boiler

Customer Question

how do you get the water pressure back up to 1 bar when boiler is off
Submitted: 5 years ago.
Category: HVAC
Expert:  Rick Ridley replied 5 years ago.
Hi Rick here UK plumber, You need to find the “filling loop” this is a silver braided flexi hose with a tap at one or both ends, connect the hose and turn on the tap/taps until you have 1.5 bar (cold) 2 bar (hot), disconnect when done, this loop is usually near the boiler but can be any where that the cold main runs near the heating pipes, Rick